Bioshrimp-2

Copefloc

Copepod Preparation

LearnmoreaboutAquamimicry

  • RedCap

Red CapTM

  • Starter for Copefloc (copepod and rotifer) in high aeration system.
  • Natural source of synbiotics (Prebiotics + Probiotic) in situ.
  • Establishes zooplankton and biocolloids in situ prior to new stocking cycle.
  • Natural zooplankton (copepod) can be used as post larvae feed till juvenile stage.

Set up the Synbiotics facility

- Intensive culture :         100 cum3 (100 ppm)

Application for preparation before stocking:

  • Rice Bran :         10 kg (100 ppm at one time)
  • Red CapTM :           25 gram (2.5 gram per kilogram of rice bran)
  • NaHCO3 :               1 kg (10% base on total weight of rice bran)
  • Water :                    40 liter 

-Make sure the tank is large enough (at least 2.5 times larger than the solution to be ferment). 

-Ferment for at least 24 hours (stir well occasionally). 

-Filter well and allow on the liquid to broadcast throughout the pond while aerations on. 

-Filtered rice bran residue can be reprocess in the fermentation tank till dissolved or pulverize them into liquid. 

-Stocking the new cycle after 5-7 days of initially dosage of synbiotics. 

-Make sure the D.O. is above 5-6 ppm at all time.

-Make sure there is no dead spot in the pond.

Maintains natural live feed after stocking (Daily):

  • Pond Capacity :     100 cum3 (10 ppm)
  • Rice Bran :             1 kg (10 ppm or 1 kg of rice bran per 100 cum3)
  • Red CapTM :           2.5 gram (2.5 gram per 1 kg of rice bran)
  • NaHCO3 :              100 gram (10% base on total weight of rice bran)
  • Water :                   4 liter 

-Make sure the tank is large enough (at least 3 times larger than the solution to be ferment). 

-Ferment for at least 24 hours (stir well occasionally). 

-Filter well and allow on the liquid to broadcast throughout the tank while aerations on. 

-Filtered rice bran can be reprocess in the fermentation tank till dissolved or pulverize them into liquid.

-Make sure the pond D.O. is above 5-6 ppm at all time.

-Once the turbidity of the pond reaches 30 cm or less, stop applying FRB and maintenance at 30 cm throughout the cycle.